FOR SURFACE OR
FLUSH MOUNTING
TYPE 2 LATCHES
THIN FOR MORTISING
TYPE 3 LATCHES
FLANGED FOR MORTISING
SHUTTERUP® LATCHES
hurricane shutter
latching systems
SX LATCHES
COMPACT,
STAINLESS STEEL
MIL-STD LATCHES
MIL-SPEC
5340-01-432-4353
RECEIVERS
ENCASED, NON-ENCASED
ACCESSORIES
GEARHEADS Screws,
HANDLES, KEYS
Technical Data Sheets - Master List by TDS #
Complete list of Technical Data sheets for information on specs, measurements, applications and instructions on all Norse Products
TDS 37-10A | Type 1 Large Latch and H6-1 Handle Component and Mounting
SHOWN HERE IS A SINGLE HANDLE MOUNTING (OPERABLE FROM ONE SIDE ONLY) WITH A LARGE TYPE 1L LATCH SURFACE MOUNTED ONTO THE DOOR
TDS 37-10B | Type 1 Large Latch and H6-1 Handles: Shaft Length and Mounting
FOR DOOR APPLICATIONS WITH HANDLES ON BOTH SIDES. THESE ILLUSTRATIONS SHOW COMPONENTS AND MOUNTING DIMENSIONS
TDS 38-1 | Type 1R Latch and 'U' Receiver
TDS 38-2 | Type 1R Latch and 'D' Receiver
TDS 38-3A | Type 1R Latch and 'H' Receiver
TDS 39-1A | Type 1R Latch - Large and Type 'J' Receiver
TDS 39-2A | Type 1R Latch - Large and Type 'JL' Receiver
A LATCHING MEANS FOR SLIDING AND HINGED DOORS, SHIPPING CONTAINERS, CASES, HOODS, ETC.
TDS 39-3A | Type 1L Latch - Large S1500-1L-750 and Short 'P' Receiver SPR250L
THIS LATCH/RECEIVER COMBINATION IS PARTICULARY USEFUL FOR DOORS, WINDOWS, BOXES, FURNITURE, CASE CLOSURES, ACCESS PANELS ON MACHINERY, HOODS
TDS 39-3B | Type 1R Latch - Large S1500-1R-750 and Short 'P' Receiver SPR250R
THIS LATCH/RECEIVER COMBINATION IS PARTICULARY USEFUL FOR DOORS, WINDOWS, BOXES, FURNITURE, CASE CLOSURES, ACCESS PANELS ON MACHINERY, HOODS
TDS 39-3C | Type 1L Latch - Large S1500-1L-750 and Short 'P' Receiver SPR250RL-1
THIS LATCH/RECEIVER COMBINATION IS PARTICULARY USEFUL FOR DOORS, WINDOWS, BOXES, FURNITURE, CASE CLOSURES, ACCESS PANELS ON MACHINERY, HOODS
TDS 39-3D | Type 1R Latch - Large S1500-1R-750 and Short 'P' Receiver SPR250L-1
THIS LATCH/RECEIVER COMBINATION IS PARTICULARY USEFUL FOR DOORS, WINDOWS, BOXES, FURNITURE, CASE CLOSURES, ACCESS PANELS ON MACHINERY, HOODS
TDS 40-1 | Type 1R Latches and Type 'P', 'U' and 'PL' Receivers
FOR 'JIFFY' ROOMS AND WALLS
IN-LINE BUTT JOINTS AND INSIDE AND OUTSIDE CORNER JOINTS
• NO PANEL PREPARATION •
TDS 40-2 | Type 1R Latch and 'P' Receiver with Spring Fingers
TDS 40-3 | Type 1R Latch and 'U' Receiver with Braces
TDS 40-4 | Type 1R Latch and 'PL' Receiver with Spring Fingers
TDS 41-1A1 | Type 1 Large Latch and the 'OT' Receiver
THE 'OT' RECEIVER HAS A SLANTED SURFACE UPON WHICH THE LATCH HOOK SLIDES WHEN LOCKING, IMPARTING AN INWARD FORCE, THEREBY COMPRESSING THE DOOR PANEL AGAINST THE CASE. THIS IS ESPECIALLY BENEFICIAL WHEN GASKETING IS INVOLVED.
TDS 41-1B1 | Type 1 Large Latch and the 'OTR187-2' Receiver
THE 'OT' RECEIVER HAS A SLANTED SURFACE UPON WHICH THE LATCH HOOK SLIDES WHEN LOCKING, IMPARTING AN INWARD FORCE, THEREBY COMPRESSING THE DOOR PANEL AGAINST THE CASE. THIS IS ESPECIALLY BENEFICIAL WHEN GASKETING IS INVOLVED.
TDS 41-2A1 | Type 1 Large Latch and the 'IT' Receiver
THE 'IT' RECEIVER HAS A SLANTED SURFACE UPON WHICH THE LATCH HOOK SLIDES WHEN LOCKING, IMPARTING A LATERAL FORCE, THEREBY COMPRESSING THE DOOR PANEL AGAINST THE CASE. THIS IS ESPECIALLY BENEFICIAL WHEN GASKETING IS INVOLVED.
TDS 41-3A1 | Type 1 Latch and The Big 'OT' Receiver
THE 'OT' RECEIVER HAS A SLANTED SURFACE UPON WHICH THE LATCH HOOK SLIDES WHEN LOCKING, IMPARTING AN INWARD FORCE, THEREBY COMPRESSING THE DOOR PANEL AGAINST THE FRAME.
TDS 42-1A | Type 1R Large Latch and Type 2 R/S Shallow Receiver
TDS 42-1C | Type 1R Large Latch and Type 2 RSL Shallow Receiver
SURFACE-MOUNTED TYPE 1 LATCH – 90° ATTACHMENT TO A FLUSH-MOUNTED TYPE 2 RSL RECEIVER
For Sliding, Folding or Hinged Doors. Also Panels Attached at 90° to a Floor or Wall
TDS 42-2A | Type 1R Large Latch and Type 2 RSLS Shallow Receiver
FOR KNOCKDOWN FURNITURE, STORE FIXTURES AND OTHER APPLICATIONS REQUIRING 90° ATTACHMENT, WHERE ONE PANEL MUST SLIDE FREELY WHEN RELEASED
TDS 42-2B | Type 1L Large Latch and Type 2 RSLS Shallow Receiver
FOR KNOCKDOWN FURNITURE, STORE FIXTURES AND OTHER APPLICATIONS REQUIRING 90º ATTACHMENT, WHERE ONE PANEL MUST SLIDE FREELY WHEN RELEASED MOUNTING THE LATCH AT 15 º . ALLOWS UNOBSTRUCTED MOVEMENT OF PANEL 'B' WHEN THE LATCH IS COCKED
TDS 43-1A | Type 1 Large Latch and Tubular Slot Receiver
Illustrated on these two pages is one of several methods of fabricating a triangular kiosk, accent column or other structure using Norse Type 1 Latches (left and right hand), with slots cut into metal tubes as Receivers. Rectangular, pentagonal and other shapes can also be formed.
TDS 43-1B | Type 1 Large Latch and Tubular Slot Receiver
Illustrated on these two pages is one of several methods of fabricating a triangular kiosk, accent column or other structure using Norse Type 1 Latches (left and right hand), with slots cut into metal tubes as Receivers. Rectangular, pentagonal and other shapes can also be formed.
TDS 44-1 | Type 1, Type 2 and Type 3 Latches - Sectional Panel Fabrication
NORSE LATCHES ARE PARTICULARLY SUITABLE FOR JOINING:
SECTIONAL FLOORING • PLATFORMS • COUNTERS • FURNITURE AND MISCELLANEOUS OTHER STRUCTURES
LATCHES ARE SHOWN MOUNTED BENEATH DECK, TABLE OR COUNTER RAILS
TDS 44-2 | Type 1R Latch S1500-1R-750DU and Type 1R Receiver R500-1R-750DU
SHOWN HERE RECESSED FLUSH BENEATH SECTIONAL FLOORING LATCHES ARE OPERATED WITH A HEX KEY THRU THE FLOOR
TDS 44-3 | Type 1L Large Latch and Receiver
NORSE TYPE 1 LATCHES ARE SHOWN HERE AS THEY ARE USED FOR SECTIONAL FLOORING, PLATFORMS, COUNTERS, ETC.
TDS 48-1A | Type 1 Latch and the Large 'O' Receiver
JOINING SEVERAL PANELS, FREE STANDING, OR TO A WALL AT VARIABLE ANGLES IS EASILY ACCOMPLISHED BY USING NORSE SURFACE MOUNTED TYPE 1 LATCHES
TDS 48-1B2 | Type 1 Latch Surface Mounting Details When Used with 'O' Receivers
SHOWN HERE IS A TYPE 1 RIGHT-HAND LATCH SURFACE MOUNTED TO A PANEL, WHICH IS ATTACHED AT ANY VARIABLE ANGLE WITH OTHER PANELS (NOT SHOWN), TO AN 'O' RECEIVER.
Type 2 Small Latches
TDS 61-1A | Type 2 Latches - The THIN ONES
"The Thin One"
The Type 2 Latches are Available in Two Sizes: Small and Large
TDS 61-1B | Type 2S Small Latches
TDS 61-2A | Type 2S Small Latches
TDS 61-2B | Type 2S Small Latches
TDS 61-3A | Type 2S Latches
Type 2S Small Receivers are shown here with the ‘Setback’* Variations and different case configurations
TDS 61-3B | Type 2S Latches
TDS 61-4A+B | Type 2 Latches & Receivers
The Type 2S Small Latches are Shown Here With 12 Setback Variations
The Type 2S Small Receivers are Shown With the Variations of ‘Setback’ Locations and Case Configurations
TDS 62-1 | Type 2S Small Latch and Type 2S Small Receiver
THE VERY THIN ONE – 0.375”/9.5mm
FOR PARTITIONS, EXHIBITS, WINDOWS, HINGED AND SLIDING DOORS
SCREENS, DISPLAYS, CASES, MODULAR ASSEMBLIES, SCENERY, ETC.
TDS 63-10A | Type 2S Small Latch & H6-1 Handle | Shaft Length and Mounting
SHOWN HERE IS A SINGLE HANDLE MOUNTING (OPERABLE FROM ONE SIDE ONLY) WITH A SMALL TYPE 2S LATCH MORTISED INTO THE DOOR
• These illustrations show components and mounting dimensions •
TDS 63-10B | Type 2S Small Latch & (2) H6-1 Handles | Shaft Length & Mounting
FOR DOOR APPLICATIONS WITH HANDLES ON BOTH SIDES
• These illustrations show components and mounting dimensions •
TDS 65-1 | Type 2S Small Latch S1125-2S-875 & Type 2S Short Receiver R/S375-2S-250
VERY THIN LATCHES AND RECEIVERS (3.75’/9.5MM)
FOR THIN PANELED EXHIBITS, STORE FIXTURES AND DOORS THE SHORT R/S RECEIVER REQUIRES A MORTISE DEPTH OF ONLY .625’/16MM)
TDS 66-1A | Type 2S Small Latch and Type 2S RSL Slotted Receiver
THIS SHALLOW RECEIVER CAN BE MOUNTED FLUSH AND BLIND IN VERY THIN PANELS. RECEIVER DEPTH IS ONLY 3/8"(9.5mm)
TDS 66-1B | Type 2S Small Latch and Type 2S RSL Slotted Receiver
THIS SHALLOW RECEIVER CAN BE MOUNTED FLUSH AND BLIND IN VERY THIN PANELS. RECEIVER DEPTH IS ONLY 3/8"(9.5mm)
TDS 66-2 | Type 2S Small Latch and Type 2 RSLS Slotted Receiver
THIS SHALLOW RECEIVER CAN BE MOUNTED FLUSH AND BLIND IN THIN PANELS. RECEIVER DEPTH IS ONLY 7/16" (11.1mm)
TDS 66-3 | Type 2S Small Latch Gasketed & Type 2S RSL Slotted Receiver
ILLUSTRATING HOW THE LATCH/RECEIVER SEPARATION FOR GASKETING OR OTHER MATERIAL IS ACCOMMODATED BY CHOOSING THE PROPER ‘SETBACKS’
TDS 68-1 | Type 2S Small Latches 'Ganged' and/or Remotely Operated
SOME APPLICATIONS REQUIRE WIDESPREAD, TWO-POINT, SIMULTANEOUSLY OPERATED ATTACHMENT OF PANELING OR ELECTRICAL ENCLOSURES, ETC.
With the Norse Fastener System this is quite feasible and several methods are available to accomplish it.
TDS 68-2 | 'Ganged' Type 2S Small Latches and Type 2S RSL Receivers
NORSE LATCHES CAN BE ‘GANGED’ AND REMOTELY OPERATED SIMULTANEOUSLY FOR JOINING VERY THICK PANELS, OR ON OTHER APPLICATIONS REQUIRING SPACED-APART, TWO-POINT ATTACHMENT
TDS 68-3 | 'Ganged' Type 2S Small Latches Using Slot Receivers
NORSE LATCHES CAN BE GANGED AND REMOTELY OPERATED, PROVIDING WIDESPREAD ATTACHMENT OF PANELING OR ELECTRICAL AND EQUIPMENT ENCLOSURES
TDS 68-4 | 'Ganged' Type 2S Small Latches using Slot Receivers
NORSE LATCHES CAN BE GANGED AND REMOTELY OPERATED, PROVIDING WIDESPREAD ATTACHMENT OF PANELING OR ELECTRICAL AND EQUIPMENT ENCLOSURES
