"The Thin One" The Type 2 Latches are Available in Two Sizes: Small and Large  

APPLICATIONS - Type 2 Small  

Typical Example of a matched Type 2S Small Latch and Receiver  

Applications  

Type 2S Small Receivers are shown here with the ‘Setback’* Variations and different case configurations  

Applications  

The Type 2S Small Latches are Shown Here With 12 Setback Variations The Type 2S Small Receivers are Shown With the Variations of ‘Setback’ Locations and Case Configurations  

THE VERY THIN ONE – 0.375”/9.5mm FOR PARTITIONS, EXHIBITS, WINDOWS, HINGED AND SLIDING DOORS SCREENS, DISPLAYS, CASES, MODULAR ASSEMBLIES, SCENERY, ETC.  

SHOWN HERE IS A SINGLE HANDLE MOUNTING (OPERABLE FROM ONE SIDE ONLY) WITH A SMALL TYPE 2S LATCH MORTISED INTO THE DOOR • These illustrations show components and mounting dimensions •  

FOR DOOR APPLICATIONS WITH HANDLES ON BOTH SIDES • These illustrations show components and mounting dimensions •  

VERY THIN LATCHES AND RECEIVERS (3.75’/9.5MM) FOR THIN PANELED EXHIBITS, STORE FIXTURES AND DOORS THE SHORT R/S RECEIVER REQUIRES A MORTISE DEPTH OF ONLY .625’/16MM)  

THIS SHALLOW RECEIVER CAN BE MOUNTED FLUSH AND BLIND IN VERY THIN PANELS. RECEIVER DEPTH IS ONLY 3/8"(9.5mm)  

THIS SHALLOW RECEIVER CAN BE MOUNTED FLUSH AND BLIND IN VERY THIN PANELS. RECEIVER DEPTH IS ONLY 3/8"(9.5mm)  

THIS SHALLOW RECEIVER CAN BE MOUNTED FLUSH AND BLIND IN THIN PANELS. RECEIVER DEPTH IS ONLY 7/16" (11.1mm)  

ILLUSTRATING HOW THE LATCH/RECEIVER SEPARATION FOR GASKETING OR OTHER MATERIAL IS ACCOMMODATED BY CHOOSING THE PROPER ‘SETBACKS’  

SOME APPLICATIONS REQUIRE WIDESPREAD, TWO-POINT, SIMULTANEOUSLY OPERATED ATTACHMENT OF PANELING OR ELECTRICAL ENCLOSURES, ETC. With the Norse Fastener System this is quite feasible and several methods are available to accomplish it.  

NORSE LATCHES CAN BE ‘GANGED’ AND REMOTELY OPERATED SIMULTANEOUSLY FOR JOINING VERY THICK PANELS, OR ON OTHER APPLICATIONS REQUIRING SPACED-APART, TWO-POINT ATTACHMENT  

NORSE LATCHES CAN BE GANGED AND REMOTELY OPERATED, PROVIDING WIDESPREAD ATTACHMENT OF PANELING OR ELECTRICAL AND EQUIPMENT ENCLOSURES  

NORSE LATCHES CAN BE GANGED AND REMOTELY OPERATED, PROVIDING WIDESPREAD ATTACHMENT OF PANELING OR ELECTRICAL AND EQUIPMENT ENCLOSURES  

FOR APPLICATIONS REQUIRING ONE PANEL TO BE JOINED TO ANOTHER WHERE BOTH ARE TO BE SURFACE MOUNTED  

THE ROD RECEIVER CAN BE USED AT ALMOST ANY ‘SETBACK’ WITH ANY LATCH, PLUS PROVIDING OTHER ADVANTAGES  

SHOWN JOINING METAL COMPONENTS  

• GREAT FOR THIN SECTIONAL FLOORING • FOR APPLICATIONS REQUIRING HIGHER CLAMPING FORCE THAN THE S1125 SPRING HOOK ASSEMBLY, THE S1250 SPRING HOOK HAS BEEN ASSEMBLED INTO A MODIFIED TYPE 2S SMALL CASE