Type 1 Small Latches are used for sliding and hinged doors and panels, vehicle hoods and access panels, signs, exhibits, stage scenery, shields, cages, lighting housings, displays and show cases, valances, etc.

For Door Applications With Handles on Both Sides  

Shown here are Two H6-1 Handles (Operable from Both Sides) with a Small Type 1L Latch Surface Mounted into the Door  

This Latch/Receiver  Combination is used for Joining Components at 90° The Latch and Receiver are usually mounted on the surface. Both external and internal mountings are shown.  

The Type 1R Latch Right Hand shown, and the Type 1L Latch Left Hand (also available), are normally surface mounted; no mortising required. They may be mounted externally or internally. This Latch/Receiver combination can be used for sliding and hinged door closures, display case covers, equipment attachment, vehicle hoods, etc. See TDS 25  

This Latch/Receiver combination is particularly useful for doors, windows, boxes, furniture, case closures, access panels on machinery, hoods, etc.  

This Latch/Receiver combination is particularly useful for doors, windows, boxes, furniture, case closures, access panels on machinery, hoods, etc.  

The "OT" Receiver has a slanted surface upon which the latch hook slides when locking, imparting a lateral force, thereby compressing the door panel against the case. This is especially beneficial when gasketing is involved. Both the "OT" and the "IT" Receivers can be used either inside or outside a case.  

For use where the Receiver is mounted flush in thin material Blind mortise for the Receiver is only .375"/9.5mm deep.  

For use where the Receiver is mounted flush in thin material Blind mortise for the Receiver is only .625"/16mm deep.  

For knockdown (KD) furniture, store fixtures and other applications requiring 90° attachment, where one panel must slide freely when released  

Shown Here Recessed Beneath Sectional Flooring, Latches are Operated with a Hex Key Thru the Floor   

 Internally Mounted for Waterproof Enclosures, Sealed Instrument Cases, Doors, Access Panels, Etc.  

FOR SECURING A SHROUD (COVER) ON A MEDICAL UNIT, INSTRUMENT CASE, ETC. Lever-operated from beneath with a latch mounted on both sides of the shroud (inside or outside)  

The Type 1 Latch is flush mounted to the inside face of the box's front panel. The Type 2S RSL Receiver is flush mounted to the lid's underside.  

Type 1 Large Latch Applications  

Applications  

Type 1 Large Latches are used for sliding/hinged door & panels, 'Jiffy' rooms, signs, exhibits, store fixtures, vehicle hoods & access panels, stage settings, cages, lighting housings, display cases, valances, gates, instrument cases, etc.  

FOR DOOR APPLICATIONS WITH HANDLES ON BOTH SIDES  

SHOWN HERE IS A SINGLE HANDLE MOUNTING (OPERABLE FROM ONE SIDE ONLY) WITH A LARGE TYPE 1L LATCH SURFACE MOUNTED ONTO THE DOOR  

FOR JOINING MEMBERS AT 90° 'T' OR CORNER JOINTS  

FOR JOINING MEMBERS AT 90º 'T' OR CORNER JOINTS  

A LATCHING MEANS FOR SLIDING AND HINGED DOORS, SHIPPING CONTAINERS, CASES, HOODS, ETC.  

THIS LATCH/RECEIVER COMBINATION IS PARTICULARY USEFUL FOR DOORS, WINDOWS, BOXES, FURNITURE, CASE CLOSURES, ACCESS PANELS ON MACHINERY, HOODS  

THIS LATCH/RECEIVER COMBINATION IS PARTICULARY USEFUL FOR DOORS, WINDOWS, BOXES, FURNITURE, CASE CLOSURES, ACCESS PANELS ON MACHINERY, HOODS  

FOR 'JIFFY' ROOMS AND WALLS IN-LINE BUTT JOINT • NO PANEL PREPARATION •  

FOR 'JIFFY' ROOMS AND WALLS OUTSIDE CORNER JOINT • NO PANEL PREPARATION •  

THE 'OT' RECEIVER HAS A SLANTED SURFACE UPON WHICH THE LATCH HOOK SLIDES WHEN LOCKING, IMPARTING AN INWARD FORCE, THEREBY COMPRESSING THE DOOR PANEL AGAINST THE CASE. THIS IS ESPECIALLY BENEFICIAL WHEN GASKETING IS INVOLVED.  

THE 'OT' RECEIVER HAS A SLANTED SURFACE UPON WHICH THE LATCH HOOK SLIDES WHEN LOCKING, IMPARTING AN INWARD FORCE, THEREBY COMPRESSING THE DOOR PANEL AGAINST THE FRAME.  

SURFACE-MOUNTED TYPE 1 LATCH – 90° ATTACHMENT TO A FLUSH-MOUNTED TYPE 2 RSL RECEIVER For Sliding, Folding or Hinged Doors. Also Panels Attached at 90° to a Floor or Wall  

FOR KNOCKDOWN FURNITURE, STORE FIXTURES AND OTHER APPLICATIONS REQUIRING 90º ATTACHMENT, WHERE ONE PANEL MUST SLIDE FREELY WHEN RELEASED MOUNTING THE LATCH AT 15 º . ALLOWS UNOBSTRUCTED MOVEMENT OF PANEL 'B' WHEN THE LATCH IS COCKED  

Illustrated on these two pages is one of several methods of fabricating a triangular kiosk, accent column or other structure using Norse Type 1 Latches (left and right hand), with slots cut into metal tubes as Receivers. Rectangular, pentagonal and other shapes can also be formed.  

SHOWN HERE RECESSED FLUSH BENEATH SECTIONAL FLOORING LATCHES ARE OPERATED WITH A HEX KEY THRU THE FLOOR  

JOINING SEVERAL PANELS, FREE STANDING, OR TO A WALL AT VARIABLE ANGLES IS EASILY ACCOMPLISHED BY USING NORSE SURFACE MOUNTED TYPE 1 LATCHES