Accessories
Browse through these Technical Data Sheets to help you find technical information, measurements, applications or options for these Norse Latch Systems. Or use the complete list below to choose the most appropriate Information Sheet.
TDS 127-1 | Cover ButtonsFor Concealing Latch Operating Key Access Holes
|
TDS Sheet Results
Listed by TDS # and Title-
For Concealing Latch Operating Key Access Holes
-
At times it is desirable to cover unused Latches, Receivers or Mortise cuts on wall panels or table edges, etc. For this purpose we have designed these plastic Cover Plates
-
7/32” (5.5MM) HEX STEEL, NICKEL PLATED
-
Usually permanently mounted, there are several ways of attachment for both single and double handle and remote operation.
-
Shroud Latches are often operated by a handle protruding from under an equipment case, traveling thru a slot which can be covered with a pliable material that restricts access by polluting matter (dust, etc). Shroud Latches are often mounted in pairs inside each side of the case, necessitating left- and right-hand units as shown here.
-
The Hub Handle accepts a wide variety of ‘grips’ used to operate Norse latches. Shown here are four simple and economical types: the H4-1 and the H4-2, each with a plastic tip or a plastic knob. Additional grip styles are forthcoming.
-
The aesthetic appearance of the polished stainless steel or bronze H6-1 and H10-1 handles has gained popular acceptance for door and window applications. See TDSs 17, 37, 63 and 122.
-
This Set Consists of a Double-Ended Offset Ratchet Wrench and Five (5) Various Length 7/32"/5.5mm Hex Bits in a Plastic Case
-
SHOWN HERE ARE BEARINGS, COLLARS, COUPLINGS, SLEEVES, SHAFTS, GEAR BOXES AND COVER BUTTONS USED IN ASSEMBLING GANGED AND/OR REMOTELY OPERATED ATTACHMENTS
-
• Ror Strong, Rapid, Reliable, Nonprogressive Rail Joinery •
-
• FOR STRONG, RAPID, RELIABLE, NONPROGRESSIVE RAIL JOINERY •
-
• NONPROGRESSIVE ASSEMBLY OF RAIL JOINTS •
-
• Acute Angle Rail Assemblies – Nonprogressive •
|
|
|
