TYPE 1 LATCHES

FOR SURFACE OR
FLUSH MOUNTING


TYPE 2 LATCHES

THIN FOR MORTISING


TYPE 3 LATCHES

FLANGED FOR MORTISING


SHUTTERUP® LATCHES

hurricane shutter
latching systems


SX LATCHES

COMPACT,
STAINLESS STEEL


MIL-STD LATCHES

MIL-SPEC
5340-01-432-4353


RECEIVERS

ENCASED, NON-ENCASED


ACCESSORIES

GEARHEADS Screws,
HANDLES, KEYS


TDS 95-2C1 | Type 2 Latches and the Large 'O' and 'OD' Receivers


The full scale illustrations on these sheets show the capacity of the several sizes of ‘O’ Receivers to accommodate panels of different thicknesses and arrangements. Type 1 and Type 3 Latches can also be used. See TDS 48 for Type 1 Latches and ‘O’ Receivers
Shown below is one of many possible panel arrangements using Type 2 Latches and the OR250-4.5 Receiver.


 

TDS 95-2B2 | Type 2 Latches and the Large 'O' and 'OD' Receivers


Shown below is another of many possible panel arrangements using Type 2 Latches with the OR250-3.5 ‘O’ Receiver. Type 1 and Type 3 Latches can also be used. See TDS 48 for Type 1 Latches and ‘O’ Receivers.


 

TDS 95-2B1 | Type 2 Latches and the Large 'O' and 'OD' Receivers


Shown below are two of many possible panel arrangements using Type 2 Latches with the OR250-3.5 and the OR250-2.38 ‘O’ Receivers. Type 1 and Type 3 Latches can also be used.


 

TDS 95-2A2 | Large 'O' and 'OD' Receivers for Joining Panels at Various Angles


SHOWN HERE ARE THREE SIZES OF ‘O’ RECEIVERS WHICH WILL ACCOMMODATE NUMEROUS PANELS AT ANY ANGLE.
TYPE 1 AND TYPE 3 LATCHES CAN ALSO BE USED WITH ‘O’ RECEIVERS. See TDS 48 for Type1 Latch and ‘O’ Receiver mounting.


 

TDS 95-2A1


THE LARGE ‘O’ AND ‘OD’ RECEIVERS CAN BE USED FOR EXHIBITS, STORE FIXTURES, MUSEUM AND ART DISPLAYS, OR FOR NUMEROUS PARTITIONING FUNCTIONS.
‘O’ and ‘OD’ Receivers can be used with Type 2 and Type 3 Latches as shown here and on the following pages. They can also be used with Type 1 Latches: see TDS 48.


 

TDS 95-1B1 | Type 2 Latches and the 'O' and 'OD' Receivers


JOINING PANELS – FREE STANDING, OR TO A WALL, AT VARIABLE ANGLES USING NORSE LATCHES AND ‘O’ & ‘OD’ RECEIVERS
For: Exhibits • Office Landscaping • Store fixtures • Enclosures Museum • Theatrical & Window Displays • Safety Shields • Etc. For ‘O’ Rceivers See TDS 95-1A1


 

TDS 95-1A2 | Type 2 Latches and the 'O' Receivers OR250-1.000


JOINING MULTIPLE FREE STANDING PANELS AT VARIABLE ANGLES
For: Exhibits • Office Landscaping • Store Fixtures • Stage Settings Museum & Art Displays • Safety Sheilds • Window Displays • Etc.


 

TDS 95-1A1 | Type 2 Latches and the 'O' and 'OD' Receivers


JOINING PANELS - FREE STANDING, OR TO A WALL, AT VARIABLE ANGLES USING NORSE LATCHES AND ‘O’ & ‘OD’ RECEIVERS For: Exhibits • Office Landscaping • Store fixtures • Enclosures Museum • Theatrical & Window Displays • Safety Shields • Etc.


 

TDS 94-7 | Type 2 Latches and Slot Receivers • Variable Angle Attachment


CHANGING THE ANGLE BETWEEN PANELS JOINED TO A TUBE IS FACILITATED BY WIDENING THE RECEIVER SLOTS IN THE TUBE AS SHOWN HERE
In the Typical Example Shown Here, Panels of 1.750”/44.5mm Thickness Are Being Joined at an Initial Angle of 60°, With Some Angular Variation Required. A Tube Diameter of 3.500”/88.9mm and a Slot Width of 1.040”/26.4mm Accommodates the Panels and Allows Angular Displacement of Each Panel of ±10°. Other Tube Diameters and Slot Widths Can Be Used.


 

TDS 93-4 | Type 2 Latch and Type 2 RSL Slotted Receiver


THIS SHALLOW RSL RECEIVER IS MOUNTED BELOW FLUSH IN A BLIND MORTISE IN A VERY THIN PANEL SO THAT A S1250--2-1.000 LATCH CAN BE USED
By simply recessing the Type 2 RSL Receiver Mounting .062”/1.6mm the fabricator can maintain the use of a S1250-2-1.000 Latch in his panel as shown here.


 


 

Stocking Distributor for Germany and Benelux Easy Click Systems

User login