TYPE 1 LATCHES

FOR SURFACE OR
FLUSH MOUNTING


TYPE 2 LATCHES

THIN FOR MORTISING


TYPE 3 LATCHES

FLANGED FOR MORTISING


SHUTTERUP® LATCHES

hurricane shutter
latching systems


SX LATCHES

COMPACT,
STAINLESS STEEL


MIL-STD LATCHES

MIL-SPEC
5340-01-432-4353


RECEIVERS

ENCASED, NON-ENCASED


ACCESSORIES

GEARHEADS Screws,
HANDLES, KEYS


TDS 116-2 | Type 3 Latch S1250-3-1.125 and Type 3 RSL Short Slotted Receiver


JOINING THICK PANELS TO THIN PANELS AT ‘T’ & CORNER JOINTS WITHOUT MORTISING THRU THE THIN MEMBER, IS READILY ACCOMPLISHED WITH A TYPE 3 LATCH AND THE VERY SHALLOW TYPE 3 RSL RECEIVER IN A BLIND MORTISE, AS SHOWN IN THESE ILLUSTRATIONS


 

TDS 116-1A2 | Dual Mounted Type 3 Latches and Type 3 Short RSL Receivers


TO FASTEN SETS OF TABLE LEGS SECURELY (YET BE ABLE TO REMOVE QUICKLY), A DUAL MOUNTING OF TYPE 3 LATCHES MORTISED INTO THE LEG TOP, WITH SHALLOW TYPE 3 RSL RECEIVERS IN THE UNDERSIDE OF THE TABLE SURFACE, CAN BE USED AS SHOWN HERE. ALIGNING PINS FACILITATE LEG ATTACHMENT.


 

TDS 116-1A1 | Type 3 Latch S1250-3-1.000 and Type 3 RSL Short Slotted Receiver


JOINING THICK PANELS TO THIN PANELS AT “T” AND CORNER JOINTS WITHOUT MORTISING THRU THE THIN MEMBER, IS READILY ACCOMPLISHED WITH A TYPE 3 LATCH AND THE VERY SHALLOW TYPE 3 RSL RECEIVER IN A BLIND MORTISE, AS SHOWN IN THESE ILLUSTRATIONS


 

TDS 115-5 | Type 3 Latch S1250-3-1.000 and Type 2 RSL Short Slotted Receiver


FOR JOINING THICK PANELS TO THIN WALL PANELS OR TUBING
Attaching a Thick Panel To a Thin Panel or Tubing can be Readily Accomplished Using Type 3 Latch and a Type 2 Short Slotted Receiver Inserted Thru a Slot in the Thin Wall and Fastened in Place. The Receiver Has Integral Factory Installed Nut Inserts For Attachment as Specified by the Part No. RSL500-2-187/8-32


 

TDS 115-4 | Type 3 Latch S1500-3-625 and Type 2 RSLS Short Slotted Receiver


FOR JOINING THICK PANELS TO THIN PANELS AT ‘T’ AND CORNER JOINTS, WITH THE TYPE 3 LATCH MOUNTED BEHIND FRAMING

  • The Type 2 RSLS Receiver is Shallower and Shorter in Length (.437”/11.1mm X 4.625”/117.5mm) Than the Standard Type 2 Short Receiver Which is (.500”/12.7mm X 5.750”/146mm)

The Type 3 Latch (S1500-3-625) Mounted Behind a Panel Frame is Frequently Used Throughout a Panel System (See TDS 109) on This Page We Show How a Type 3 Latch in That Mounting can be Used With a Shallow Type 2 RSLS Receiver Flush Mounted in a Blind Mortise, To Make a ‘T’ or Corner Attachment To a Thin Panel


 

TDS 115-3 | Type 3 Latch S1250-3-1.125 and Type 2 RSLS Slotted Receiver


FOR JOINING THICK PANELS TO THIN PANELS AT “T’ AND CORNER JOINTS

  • The Type 2 RSLS Receiver is Shallower and Shorter in Length (.437”/11.1mm X 4.625”/117.5mm)Than the Standard Type 2 Short Receiver Which is (.500”/12.7mm X 5.750”/146mm)

Attaching a Thick Panel to a Thin Panel in a ‘T’ or Corner Joint Without Penetrating the Thin Member can be Readily Accomplished Using a Type 3 Latch and a Shallow Type 2 RSLS Receiver in a Blind Mortise as Shown in These Illustrations


 

TDS 115-2 | Type 3 Latch S1500-3-625 and Type 2 RSL Short Slotted Receiver


FOR JOINING THICK PANELS TO THIN PANELS AT ‘T’ AND CORNER JOINTS, WITH TYPE 3 LATCH MOUNTED BEHIND FRAMING
The Type 3 Latch (S1500-3-625) Mounted Behind a Panel Frame is Frequently Used Throughout a Panel System (See TDS 109) On This Page We Show How a Type 3 Latch in That Mounting Can Be Used With a Shallow Type 2 RSL Receiver Flush Mounted in a Blind Mortise, to Make a ‘T’ or Corner Attachment To a Thin Panel


 

TDS 115-1 | Type 3 Latch S1250-3-1.125 Type 2 RSL Short Slotted Receiver


FOR JOINING THICK PANELS TO THIN PANELS AT ‘T’ AND CORNER JOINTS
Attaching a Thick Panel to a Thin Panel in a ‘T’ or Corner Joint Without Penetrating the Thin Member Can Be Readily Accomplished Using a Type 3 Latch and a Shallow Type 2 RSL Receiver in a Blind Mortise as Shown in These Illustrations.


 

TDS 114-2 | Type 3 Latch S1500-3-1.000 and Type 2 R/S Short Receiver


FOR JOINING THICKER PANELS TO THIN PANELS AT ‘T’S AND CORNERS
THIS PARTICULAR ‘THICK THIN’ PANEL APPLICATION DEALS WITH ACCOMODATING THE USE OF AN S1500-3-1.000 LATCH WHICH IS IS BEING USED EXTENSIVELY ELSEWHERE IN A PANEL SYSTEM, AND HOW THIS JOINING SITUATION CAN BE ACCOMPLISHED WITHOUT INTRODUCING A DIFFERENT TYPE 3 LATCH (VERY SIMILAR IN APPEARANCE, BUT WITH A DIFFERENT “SETBACK”, OR SPRING), WHICH IF MISLOCATED WOULD RESULT IN A MALFUNCTION
REFER TO TDSs 114-1 OR TDS 115, WHICH ARE ALTERNATE METHODS OF ACCOMPLISHING THIS TYPE OF JOINT


 

TDS 114-1 | Type 3 Latch and Type 2 R/S Short Receiver


FOR JOINING THICKER PANELS TO THIN PANELS AT ‘T’S AND CORNERS
These illustrations show how a Type 3 Latch (S1250-3-1.000) Installed in a relatively thick panel can be joined to a much thinner panel by using a Type 2R/S Short Receiver (R/S500-2-250)
Please Refer to TDS 115 Showing an Alternate method of accomplishing this Type of joint to an even thinner panel.


 


 

Stocking Distributor for Germany and Benelux Easy Click Systems

User login