TYPE 1 LATCHES

FOR SURFACE OR
FLUSH MOUNTING


TYPE 2 LATCHES

THIN FOR MORTISING


TYPE 3 LATCHES

FLANGED FOR MORTISING


SHUTTERUP® LATCHES

hurricane shutter
latching systems


SX LATCHES

COMPACT,
STAINLESS STEEL


MIL-STD LATCHES

MIL-SPEC
5340-01-432-4353


RECEIVERS

ENCASED, NON-ENCASED


ACCESSORIES

GEARHEADS Screws,
HANDLES, KEYS


TDS 126-12 | Cup Receiver


The Receiver for joining panels at infinitely variable angles.
The Cup Receiver facilitates joining panel elements at infinitely variable angles. Multiple panel to panel (free standing), or panel to wall joints are easily accomplished. The Cup Receiver slips into common 1 1/2" PVC water pipe tubing forming a close fitting sight and sound barrier for office landscaping and other partitioning projects.


 

TDS 126-11-1 | Type 2 Latches and the Large 'O' and 'OD' Receivers


SHOWN HERE ARE THREE SIZES OF ‘O’ RECEIVERS WHICH WILL ACCOMMODATE NUMEROUS PANELS AT ANY ANGLE. ALSO SEE OVERLEAF TYPE 1 AND TYPE 3 LATCHES CAN ALSO BE USED WITH ‘O’ RECEIVERS SEE TDS 48 FOR TYPE 1 LATCH AND ‘0’ RECEIVER MOUNTING


 

TDS 126-10 | 'O' Receiver and 'OD' Receiver


‘O’ and ‘OD’ Receivers facilitate multiple panel joining at infinitely variable angles, both free standing or to a wall as shown in Fig 3.


 

TDS 126-9C | Big 'OT' Receiver and Type 1 Large Latch


The Big ‘OT’ Receiver has a slanted strike surface upon which the Latch Hook slides when locking, imparting a downward force on the latch. This is especially beneficial in such applications as clamping a hurricane panel inward against a window frame, so as to withstand the strong winds of a hurricane.


 

TDS 126-9B | 'OT' Receiver: OTR187-2 with Keyholes for Screws


This ‘OT’ Receiver has a slanted surface upon which the Latch hook slides when locking, imparting a lateral force that compresses the door against the case. This is especially beneficial when gasketing is involved. The ‘OT’ Receiver can be used either inside or outside a case. See TDSs 21-1, 21-2, 41-1 and 41-2.
Of particular interest the OTR187-2 has keyhole-shaped screw holes for the easy removal of these Receivers when used, for example, as window hardware for hurricane shutters. See TDS 207-2A1.


 

TDS 126-9A | 'IT' Receiver and 'OT' Receiver


The ‘IT’ and ‘OT’ Receivers each have a slanted surface upon which the Latch hook slides when locking, imparting a lateral force when compressing the door panel against the case. This is especially beneficial when gasketing is involved. Both the ‘IT’ and ‘OT’ Receivers can be used either inside or outside a case. See TDSs 21-1 and 21-2, and 41-1 and 41-2.


 

TDS 126-8 | 'PL' Receiver


‘PL’ Receivers are most often used with Type 1 Latches on case goods, doors, wall panel corner joints, etc. When used with Spring Fingers (see Fig. 3), they assist in holding corner panel joints at 90°.


 

TDS 126-7 | 'P' Receiver


‘P’ Receivers are commonly used with Type 1 Latches on door, case and wall panel applications. When used in conjunction with the ‘Spring Fingers’ (see Fig. 3), they assist in keeping wall panels and counter & table tops tight and in-line.


 

TDS 126-6 | Mushroom Receivers and Short 'P' Receivers


THE ‘MUSHROOM’ RECEIVER AXIALLY JOINS TUBULAR MEMBERS SO THAT RANDOM RADIAL ORIENTATION IS ACCOMMODATED. THE TUBES CAN BE ROTATED AS REQUIRED.

THE SHORT ‘P’ RECEIVER CAN BE USED WITH ANY NORSE LATCH. THESE RECEIVERS ARE PARTICULARLY USEFUL FOR DOORS, WINDOWS, BOXES, CASE CLOSURES, PANEL JOINTS, COUPLINGS, ETC.


 

TDS 126-5 | 'J' Receiver and 'JL' Receiver


The ‘J’ Receiver expands the utility of the Norse Latches considerably. Its versatility is shown here in these applications.

‘JL’ Receivers facilitate container lid tie-down and around-the-corner closures in addition to many other applications.


 


 

Stocking Distributor for Germany and Benelux Easy Click Systems

User login