TYPE 1 LATCHES

FOR SURFACE OR
FLUSH MOUNTING


TYPE 2 LATCHES

THIN FOR MORTISING


TYPE 3 LATCHES

FLANGED FOR MORTISING


SHUTTERUP® LATCHES

hurricane shutter
latching systems


SX LATCHES

COMPACT,
STAINLESS STEEL


MIL-STD LATCHES

MIL-SPEC
5340-01-432-4353


RECEIVERS

ENCASED, NON-ENCASED


ACCESSORIES

GEARHEADS Screws,
HANDLES, KEYS


TDS 207-3A1 | Hurricane Shutter Latches: Joining Panels Side-By-Side for Large Openings


JOINING MULTIPLE PANELS FOR WIDE AND HIGH OPENINGS SUCH AS PICTURE WINDOWS, PATIO DOORS, GARAGES, ETC. THE NORSE HURRICANE LATCH SYSTEM SEALS AT THE TOP, SIDES AND BOTTOM

PANEL PREPARATION IS SIMPLE AND NOT TIME-CONSUMING PANELS ARE FIRMLY CLAMPED TOGETHER AND THE JOINT IS CONSIDERABLY STIFFENED AND WIND-SEALED. WHERE SEVERE STORMS ARE EXPECTED, SEE TDS 207-3A2 RECOMMEND 3/4” PLYWOOD FOR STRENGTH IN A STORM


 

TDS 207-2B1 | Hurricane Shutter Panels - Flush Mounting Type 1 Latches and OTR187 Receivers in Cement Framing


FOR FLUSH MOUNTING IN WOOD FRAMING SEE TDS 207-2A1
SIMPLE ENOUGH TO INSTALL YOURSELF •ECONOMICAL ENOUGH TO HIRE IT DONE

THIS LATCH AND RECEIVER COMBINATION IS PARTICULARLY SUITABLE FOR QUICKLY AND EASILY ATTACHING HURRICANE SHUTTERS INSIDE WINDOW AND DOOR FRAMES. THE UNIQUE DESIGN IMPARTS A STRONG INWARD FORCE ON THE LATCH BY THE RECEIVER’S SLANTED STRIKE, FIRMLY PRESSING THE LATCH AND PANEL INWARD AGAINST THE WINDOW FRAME OR AGAINST THE STOPS.


 

TDS 207-2A1 | Hurricane Shutter Panels - Flush Mounting Type 1 Latches and OTR187 Receivers in Wood Framing


FOR FLUSH MOUNTING IN CEMENT FRAMING SEE TDS 207-2B1
SIMPLE ENOUGH TO INSTALL YOURSELF •ECONOMICAL ENOUGH TO HIRE IT DONE

THIS LATCH AND RECEIVER COMBINATION IS PARTICULARLY SUITABLE FOR QUICKLY AND EASILY ATTACHING HURRICANE SHUTTERS INSIDE WINDOW AND DOOR FRAMES. THE UNIQUE DESIGN IMPARTS A STRONG INWARD FORCE ON THE LATCH BY THE RECEIVER’S SLANTED STRIKE, FIRMLY PRESSING THE LATCH AND PANEL INWARD AGAINST THE WINDOW FRAME OR AGAINST THE STOPS.


 

TDS 207-1B1 | Hurricane Shutter Panels - Surface Mounting Type 1 Latches/Big 'OT' Receivers on Cement Framing


FOR SURFACE MOUNTING ON WOOD FRAMING SEE TDS 207-1A1
SIMPLE ENOUGH TO INSTALL YOURSELF •ECONOMICAL ENOUGH TO HIRE IT DONE


THIS LATCH AND RECEIVER COMBINATION IS PARTICULARLY SUITABLE FOR QUICKLY AND EASILY ATTACHING HURRICANE SHUTTERS ONTO WINDOWS AND DOORS. THE UNIQUE DESIGN IMPARTS A STRONG INWARD FORCE ON THE LATCH BY THE RECEIVER’S SLANTED STRIKE, FIRMLY PRESSING THE LATCH AND PANEL INWARD AGAINST THE WINDOW FRAME.


 

TDS 207-1A1 | Hurricane Shutter Panels - Surface Mounting Type 1 Latches/ Big 'OT' Receivers on Wood Framing


FOR SURFACE MOUNTING ON CEMENT FRAMING SEE TDS 207-1B1
SIMPLE ENOUGH TO INSTALL YOURSELF •ECONOMICAL ENOUGH TO HIRE IT DONE

THIS LATCH AND RECEIVER COMBINATION IS PARTICULARLY SUITABLE FOR QUICKLY AND EASILY ATTACHING HURRICANE SHUTTERS ONTO WINDOWS AND DOORS. THE UNIQUE DESIGN IMPARTS A STRONG INWARD FORCE ON THE LATCH BY THE RECEIVER’S SLANTED STRIKE, FIRMLY PRESSING THE LATCH AND PANEL INWARD AGAINST THE WINDOW FRAME.


 

TDS 206-1A1 | Shutterup® Hurricane Shutter Fastener System


IT’S STRONG • IT’S SIMPLE • IT’S FAST

ERECTING PLYWOOD HURRICANE SHUTTER PANELS WITH THE SHUTTERUP® SYSTEM IS QUICKLY ACCOMPLISHED DUE TO THE SIMPLE ASSEMBLY OF THE COMPONENTS


 

TDS 126-16 | Channel Receiver


A Channel Receiver is part of an engineered Norse Multilatch® assembly
Channel Receivers have been designed for use with Norse Multilatches which usually consist of two to four Latches operating simultaneously and mounted on a common channel or angle member. This Channel Receiver serves as a strike for all the Latches. In one usage it may be attached to an elevator cab wall, or on the emergency exit door itself, to which it serves also as a stiffener. It is also frequently used on RF shielded electronic cabinets.


 

TDS 126-15 | 'JLW' Wide Receiver


‘JLW’ Wide Receivers were designed for use with Norse Heavy Duty Multilatches® which have two shock hooks in addition to the Latch Spring Hook, at each of the multiple Latch stations. These are used as simultaneous-locking panel corner connections. The extra width Receivers compensate for tolerance build up over an 8'/2.4m (or more) span.


 

TDS 126-14 | Angle Receivers


The Angle Receivers provide a convenient method of forming right angle joints, usually where only one face of the panels is exposed.


 

TDS 126-13 | Hinge Receiver


The Hinged Receiver can be used to join one panel to another, or to a wall, thereby producing a variable angle connection.


 


 

Stocking Distributor for Germany and Benelux Easy Click Systems

User login