TYPE 1 LATCHES

FOR SURFACE OR
FLUSH MOUNTING


TYPE 2 LATCHES

THIN FOR MORTISING


TYPE 3 LATCHES

FLANGED FOR MORTISING


SHUTTERUP® LATCHES

hurricane shutter
latching systems


SX LATCHES

COMPACT,
STAINLESS STEEL


MIL-STD LATCHES

MIL-SPEC
5340-01-432-4353


RECEIVERS

ENCASED, NON-ENCASED


ACCESSORIES

GEARHEADS Screws,
HANDLES, KEYS


Technical Data Sheets - Master List Type 1 Large by TDS #

Complete list of Technical Data sheets for information on specs, measurements, applications and instructions on all Norse Products
 

TDS 36-1A | Type 1 Large Latches

Type 1 Latches are available in two sizes: Small and Large Both sizes are available either left- or right-hand operating (to lock)  

Download:

 


TDS 36-1B | Type 1 Large Latches: Applications

Type 1 Large Latch Applications  

Download:

 


TDS 36-2A | Type 1 Large Latches

Latches and Receivers are Available Either Right or Left Hand Operating  

Download:

 


TDS 36-2B | Type 1 Large Latches

Applications  

Download:

 


TDS 36-3A | Type 1L Latch - Large (left hand) and Type 1L Receiver - Large

'Type 1 Large Latches are used for 'Jiffy' walls, vehicle hoods & access panels, signs, exhibits, stage scenery, headers, sliding & hinged doors & panels, shields, cages, valances  

Download:

 


TDS 36-4A | Type 1R Latch - Large (right hand) and Type 1R Receiver - Large

Type 1 Large Latches are used for sliding/hinged door & panels, 'Jiffy' rooms, signs, exhibits, store fixtures, vehicle hoods & access panels, stage settings, cages, lighting housings, display cases, valances, gates, instrument cases, etc.  

Download:

 


TDS 37-2A | Type 1 Large Latch with One Hub-Type Handle

FOR DOOR APPLICATIONS WITH ONE HANDLE ONLY  

Download:

 


TDS 37-2B | Type 1 Large Latch with Two Hub-Type Handles

FOR DOOR APPLICATIONS WITH HANDLES ON BOTH SIDES  

Download:

 


TDS 37-4B | Type 1 Latch with Two Handles

FOR DOOR APPLICATIONS WITH HANDLES ON BOTH SIDES. THESE ILLUSTRATIONS SHOW COMPONENTS AND MOUNTING DIMENSIONS. DOOR CAN BE ANY THICKNESS. MANY OTHER TYPES OF RECEIVERS CAN BE USED. OTHER TYPES OF HANDLES ARE AVAILABLE.  

Download:

 


TDS 37-10A | Type 1 Large Latch and H6-1 Handle Component and Mounting

SHOWN HERE IS A SINGLE HANDLE MOUNTING (OPERABLE FROM ONE SIDE ONLY) WITH A LARGE TYPE 1L LATCH SURFACE MOUNTED ONTO THE DOOR  

Download:

 


TDS 37-10B | Type 1 Large Latch and H6-1 Handles: Shaft Length and Mounting

FOR DOOR APPLICATIONS WITH HANDLES ON BOTH SIDES. THESE ILLUSTRATIONS SHOW COMPONENTS AND MOUNTING DIMENSIONS  

Download:

 


TDS 38-1 | Type 1R Latch and 'U' Receiver

FOR JOINING MEMBERS AT 90° 'T' OR CORNER JOINTS  

Download:

 


TDS 38-2 | Type 1R Latch and 'D' Receiver

FOR JOINING MEMBERS AT 90° 'T' OR CORNER JOINTS  

Download:

 


TDS 38-3A | Type 1R Latch and 'H' Receiver

FOR JOINING MEMBERS AT 90º 'T' OR CORNER JOINTS  

Download:

 


TDS 39-1A | Type 1R Latch - Large and Type 'J' Receiver

A LATCHING MEANS FOR SLIDING AND HINGED DOORS, CASES, HOODS, ETC.  

Download:

 


TDS 39-2A | Type 1R Latch - Large and Type 'JL' Receiver

A LATCHING MEANS FOR SLIDING AND HINGED DOORS, SHIPPING CONTAINERS, CASES, HOODS, ETC.  

Download:

 


TDS 39-3A | Type 1L Latch - Large S1500-1L-750 and Short 'P' Receiver SPR250L

THIS LATCH/RECEIVER COMBINATION IS PARTICULARY USEFUL FOR DOORS, WINDOWS, BOXES, FURNITURE, CASE CLOSURES, ACCESS PANELS ON MACHINERY, HOODS  

Download:

 


TDS 39-3B | Type 1R Latch - Large S1500-1R-750 and Short 'P' Receiver SPR250R

THIS LATCH/RECEIVER COMBINATION IS PARTICULARY USEFUL FOR DOORS, WINDOWS, BOXES, FURNITURE, CASE CLOSURES, ACCESS PANELS ON MACHINERY, HOODS  

Download:

 


TDS 39-3C | Type 1L Latch - Large S1500-1L-750 and Short 'P' Receiver SPR250RL-1

THIS LATCH/RECEIVER COMBINATION IS PARTICULARY USEFUL FOR DOORS, WINDOWS, BOXES, FURNITURE, CASE CLOSURES, ACCESS PANELS ON MACHINERY, HOODS  

Download:

 


TDS 39-3D | Type 1R Latch - Large S1500-1R-750 and Short 'P' Receiver SPR250L-1

THIS LATCH/RECEIVER COMBINATION IS PARTICULARY USEFUL FOR DOORS, WINDOWS, BOXES, FURNITURE, CASE CLOSURES, ACCESS PANELS ON MACHINERY, HOODS  

Download:

 


TDS 40-1 | Type 1R Latches and Type 'P', 'U' and 'PL' Receivers

FOR 'JIFFY' ROOMS AND WALLS IN-LINE BUTT JOINTS AND INSIDE AND OUTSIDE CORNER JOINTS • NO PANEL PREPARATION •  

Download:

 


TDS 40-2 | Type 1R Latch and 'P' Receiver with Spring Fingers

FOR 'JIFFY' ROOMS AND WALLS IN-LINE BUTT JOINT • NO PANEL PREPARATION •  

Download:

 


TDS 40-3 | Type 1R Latch and 'U' Receiver with Braces

FOR 'JIFFY' ROOMS AND WALLS INSIDE CORNER JOINT • NO PANEL PREPARATION •  

Download:

 


TDS 40-4 | Type 1R Latch and 'PL' Receiver with Spring Fingers

FOR 'JIFFY' ROOMS AND WALLS OUTSIDE CORNER JOINT • NO PANEL PREPARATION •  

Download:

 


TDS 41-1A1 | Type 1 Large Latch and the 'OT' Receiver

THE 'OT' RECEIVER HAS A SLANTED SURFACE UPON WHICH THE LATCH HOOK SLIDES WHEN LOCKING, IMPARTING AN INWARD FORCE, THEREBY COMPRESSING THE DOOR PANEL AGAINST THE CASE. THIS IS ESPECIALLY BENEFICIAL WHEN GASKETING IS INVOLVED.  

Download:

 


TDS 41-1B1 | Type 1 Large Latch and the 'OTR187-2' Receiver

THE 'OT' RECEIVER HAS A SLANTED SURFACE UPON WHICH THE LATCH HOOK SLIDES WHEN LOCKING, IMPARTING AN INWARD FORCE, THEREBY COMPRESSING THE DOOR PANEL AGAINST THE CASE. THIS IS ESPECIALLY BENEFICIAL WHEN GASKETING IS INVOLVED.  

Download:

 


TDS 41-2A1 | Type 1 Large Latch and the 'IT' Receiver

THE 'IT' RECEIVER HAS A SLANTED SURFACE UPON WHICH THE LATCH HOOK SLIDES WHEN LOCKING, IMPARTING A LATERAL FORCE, THEREBY COMPRESSING THE DOOR PANEL AGAINST THE CASE. THIS IS ESPECIALLY BENEFICIAL WHEN GASKETING IS INVOLVED.  

Download:

 


TDS 41-3A1 | Type 1 Latch and The Big 'OT' Receiver

THE 'OT' RECEIVER HAS A SLANTED SURFACE UPON WHICH THE LATCH HOOK SLIDES WHEN LOCKING, IMPARTING AN INWARD FORCE, THEREBY COMPRESSING THE DOOR PANEL AGAINST THE FRAME.  

Download:

 


TDS 42-1A | Type 1R Large Latch and Type 2 R/S Shallow Receiver

USED TYPICALLY FOR ATTACHMENT TO A FLOOR OR WALL, ETC.  

Download:

 


TDS 42-1C | Type 1R Large Latch and Type 2 RSL Shallow Receiver

SURFACE-MOUNTED TYPE 1 LATCH – 90° ATTACHMENT TO A FLUSH-MOUNTED TYPE 2 RSL RECEIVER For Sliding, Folding or Hinged Doors. Also Panels Attached at 90° to a Floor or Wall  

Download:

 


TDS 42-2A | Type 1R Large Latch and Type 2 RSLS Shallow Receiver

FOR KNOCKDOWN FURNITURE, STORE FIXTURES AND OTHER APPLICATIONS REQUIRING 90° ATTACHMENT, WHERE ONE PANEL MUST SLIDE FREELY WHEN RELEASED  

Download:

 


TDS 42-2B | Type 1L Large Latch and Type 2 RSLS Shallow Receiver

FOR KNOCKDOWN FURNITURE, STORE FIXTURES AND OTHER APPLICATIONS REQUIRING 90º ATTACHMENT, WHERE ONE PANEL MUST SLIDE FREELY WHEN RELEASED MOUNTING THE LATCH AT 15 º . ALLOWS UNOBSTRUCTED MOVEMENT OF PANEL 'B' WHEN THE LATCH IS COCKED  

Download:

 


TDS 43-1A | Type 1 Large Latch and Tubular Slot Receiver

Illustrated on these two pages is one of several methods of fabricating a triangular kiosk, accent column or other structure using Norse Type 1 Latches (left and right hand), with slots cut into metal tubes as Receivers. Rectangular, pentagonal and other shapes can also be formed.  

Download:

 


TDS 43-1B | Type 1 Large Latch and Tubular Slot Receiver

Illustrated on these two pages is one of several methods of fabricating a triangular kiosk, accent column or other structure using Norse Type 1 Latches (left and right hand), with slots cut into metal tubes as Receivers. Rectangular, pentagonal and other shapes can also be formed.  

Download:

 


TDS 44-1 | Type 1, Type 2 and Type 3 Latches - Sectional Panel Fabrication

NORSE LATCHES ARE PARTICULARLY SUITABLE FOR JOINING: SECTIONAL FLOORING • PLATFORMS • COUNTERS • FURNITURE AND MISCELLANEOUS OTHER STRUCTURES      LATCHES ARE SHOWN MOUNTED BENEATH DECK, TABLE OR COUNTER RAILS  

Download:

 


TDS 44-2 | Type 1R Latch S1500-1R-750DU and Type 1R Receiver R500-1R-750DU

SHOWN HERE RECESSED FLUSH BENEATH SECTIONAL FLOORING LATCHES ARE OPERATED WITH A HEX KEY THRU THE FLOOR  

Download:

 


TDS 44-3 | Type 1L Large Latch and Receiver

NORSE TYPE 1 LATCHES ARE SHOWN HERE AS THEY ARE USED FOR SECTIONAL FLOORING, PLATFORMS, COUNTERS, ETC.  

Download:

 


TDS 48-1A | Type 1 Latch and the Large 'O' Receiver

JOINING SEVERAL PANELS, FREE STANDING, OR TO A WALL AT VARIABLE ANGLES IS EASILY ACCOMPLISHED BY USING NORSE SURFACE MOUNTED TYPE 1 LATCHES  

Download:

 


TDS 48-1B2 | Type 1 Latch Surface Mounting Details When Used with 'O' Receivers

SHOWN HERE IS A TYPE 1 RIGHT-HAND LATCH SURFACE MOUNTED TO A PANEL, WHICH IS ATTACHED AT ANY VARIABLE ANGLE WITH OTHER PANELS (NOT SHOWN), TO AN 'O' RECEIVER.  

Download:

 



 

Stocking Distributor for Germany and Benelux Easy Click Systems

Visitors

  • Total Visitors: 10450958
  • Since: Thu, 02/28/2019 - 13:25