TYPE 1 LATCHES

FOR SURFACE OR
FLUSH MOUNTING


TYPE 2 LATCHES

THIN FOR MORTISING


TYPE 3 LATCHES

FLANGED FOR MORTISING


SHUTTERUP® LATCHES

hurricane shutter
latching systems


SX LATCHES

COMPACT,
STAINLESS STEEL


MIL-STD LATCHES

MIL-SPEC
5340-01-432-4353


RECEIVERS

ENCASED, NON-ENCASED


ACCESSORIES

GEARHEADS Screws,
HANDLES, KEYS


Technical Data Sheets - Master List by TDS #

Complete list of Technical Data sheets for information on specs, measurements, applications and instructions on all Norse Products
 



TDS 70-2A | Type 2S Small Latch & 'U' Receiver - Surface Mounted

FOR APPLICATIONS REQUIRING ONE PANEL TO BE JOINED TO ANOTHER WHERE BOTH ARE TO BE SURFACE MOUNTED  

Download:

 


TDS 71-1A1 | Type 2S Small Latch and Rod Receivers

THE ROD RECEIVER CAN BE USED AT ALMOST ANY ‘SETBACK’ WITH ANY LATCH, PLUS PROVIDING OTHER ADVANTAGES  

Download:

 


TDS 72-1A | Type 2S Small Latch with Nut Inserts and Slot Receiver

SHOWN JOINING METAL COMPONENTS  

Download:

 


TDS 77-2A | Type 2S1 Small Latch with S1250 Hook & Slot Receiver

• GREAT FOR THIN SECTIONAL FLOORING • FOR APPLICATIONS REQUIRING HIGHER CLAMPING FORCE THAN THE S1125 SPRING HOOK ASSEMBLY, THE S1250 SPRING HOOK HAS BEEN ASSEMBLED INTO A MODIFIED TYPE 2S SMALL CASE  

Download:

 


Type 2 Large Latches



 


TDS 81-1A | Type 2 Large Latches - The Thin One

  BASIC COMBINATIONS OF TYPE 2 LATCHES AND RECEIVERS  

Download:

 


TDS 81-1B | Type 2 Large Latches

  APPLICATIONS TYPE 2 LARGE LATCHES  

Download:

 


TDS 81-2A | Type 2 Large Latches

  Either the S1500 or the S1250 Spring Hook can be used in the Large Type 2 Latches  

Download:

 


TDS 81-2B | Type 2 Large Latches

The Type 2 Latch can have the Spring Hook mounted in reverse in the case (S1500-2R-750)  

Download:

 


TDS 81-3A | Type 2 Large Latches

    The variable 'Setbacks'* And Choices of Spring Hooks The S1500 or S1250 Spring Hook Can Be Used In the Type 2 Latches  

Download:

 


TDS 81-3B | Type 2 Large Receivers

    The Variable 'Setbacks'* And Short & Slotted Case Configurations  

Download:

 


TDS 81-3C | Type 2 Large Latches

  Applications  

Download:

 


TDS 81-4 | Type 2 Large Latches & Receivers

Matching Type 2 Large Latches with Receivers | The Variable ‘Setbacks’* And Choice Of Spring Hooks  

Download:

 


TDS 83-10A | Type 2 Large Latch & H6-1 Handle - Shaft Length and Mounting

SHOWN HERE IS A SINGLE HANDLE MOUNTING (OPERABLE FROM BOTH SIDES) WITH A LARGE TYPE 2 LATCH MORTISED INTO THE DOOR • These illustrations show components and mounting directions • For Dual Handles See TDS 83-10B  

Download:

 


TDS 83-10B | Type 2 Large Latch & (2) H6-1 Handles - Shaft Length & Mounting

FOR DOOR APPLICATIONS WITH HANDLES ON BOTH SIDES. • These illustrations show components and mounting directions • For Single Handle Assemblies See TDS 83-10A  

Download:

 


TDS 84-1 | Reversed Flange Type 2R Latch & Type 2 Receiver

A TYPE 2R LATCH AND TYPE 2 RECEIVER ARE MOUNTED IN THICK FRAMING WITH FLANGES REVERSED  

Download:

 


TDS 85-3A | Type 2 Latch: S1250-2-1.000 and 'U' Receiver: UR500-500

ATTACHING THIN PANELS AT ‘T’ AND CORNER JOINTS. LATCH IS MOUNTED BEHIND FRAMING; ‘U’ RECEIVER IS SURFACE MOUNTED. WITH THIS LATCH/RECEIVER COMBINATION, EITHER PANEL CAN BE INVERTED.  

Download:

 


TDS 87-1A1 | Type 2 Latch S1500-2-625 and the Type 'H' Receiver HR468-562

USED ON EXHIBITS, STORE FIXTURES, OFFICE PANELS, PREFAB STRUCTURES, ETC. THIS TYPE 2 LATCH AND ‘H’ RECEIVER ARE MOUNTED BEHIND THE PANEL FRAMING LESS PANEL PREPARATION • NO LATCH FLANGE RECESS REQUIRED • CAN BE NAILED IN PLACE  

Download:

 


TDS 87-2A1 | Type 2 Latch S1250-2-1.062 using a Slot Receiver

USED ON EXHIBITS, STORE FIXTURES, OFFICE PANELS, PREFAB STRUCTURES, ETC. THIS TYPE 2 LATCH IS MOUNTED INSIDE THE METAL FRAMING. SLOT IN THE ADJOINING MEMBER IS USED AS A RECEIVER.  

Download:

 


TDS 89-1 | Type 2 Latch S1500-2-750 Type 2 Receiver R500-2-750

THE THIN LATCH FOR JOINING THIN PANELS ON SECTIONAL FURNITURE, EXHIBITS, STORE FIXTURES, COUNTERS AND BARS, FLOORING, ETC.  

Download:

 


TDS 91-1 | Type 2 Latch & Type 2 R/S Short Receiver

USED IN THIN WALL PARTITIONS FOR IN-LINE BUTT JOINTS AND ‘BLIND’ MORTISES AT ‘T’ & CORNER JOINTS For Prefab construction of Exhibits, Store Fixtures, Office Panels, Etc. This Latch/Receiver Combination is a Unique and Frequently Used Method  

Download:

 


TDS 92-1 | Type 2 Latch using Slot Receiver in Thin Metal

THE TYPE 2 LATCH IS UNEXCELLED AS A CASE LATCH FOR EQUIPMENT ATTACHMENT, EQUIPMENT CASES, MODULAR UNIT COUPLING, COFFIN SEALING, PICKUP TRUCK CAMPER TIEDOWN, TRACTOR HOODS, WALL PANELING, ETC. The Type 2 Latch is shown below in a typical application joining thin metal elements where a slot in the metal is used as a receiver.  

Download:

 


TDS 93-1 | Type 2 Latch and Type 2 RSL Slotted Receiver

THIS SHALLOW RECEIVER CAN BE MOUNTED FLUSH AND BLIND IN VERY THIN PANELS RECEIVER DEPTH IS ONLY 1/2" (12.7mm)  

Download:

 


TDS 93-2 | Type 2 Latch S1250-2-1.000 and Type 2 RSL Short Slotted Receiver

FOR JOINING THIN PANELS TO THINNER WALL PANELS OR TUBING  

Download:

 


TDS 93-4 | Type 2 Latch and Type 2 RSL Slotted Receiver

THIS SHALLOW RSL RECEIVER IS MOUNTED BELOW FLUSH IN A BLIND MORTISE IN A VERY THIN PANEL SO THAT A S1250--2-1.000 LATCH CAN BE USED By simply recessing the Type 2 RSL Receiver Mounting .062”/1.6mm the fabricator can maintain the use of a S1250-2-1.000 Latch in his panel as shown here.  

Download:

 


TDS 94-7 | Type 2 Latches and Slot Receivers • Variable Angle Attachment

CHANGING THE ANGLE BETWEEN PANELS JOINED TO A TUBE IS FACILITATED BY WIDENING THE RECEIVER SLOTS IN THE TUBE AS SHOWN HERE In the Typical Example Shown Here, Panels of 1.750”/44.5mm Thickness Are Being Joined at an Initial Angle of 60°, With Some Angular Variation Required. A Tube Diameter of 3.500”/88.9mm and a Slot Width of 1.040”/26.4mm Accommodates the Panels and Allows Angular Displacement of Each Panel of ±10°. Other Tube Diameters and Slot Widths Can Be Used.  

Download:

 


TDS 95-1A1 | Type 2 Latches and the 'O' and 'OD' Receivers

JOINING PANELS - FREE STANDING, OR TO A WALL, AT VARIABLE ANGLES USING NORSE LATCHES AND ‘O’ & ‘OD’ RECEIVERS For: Exhibits • Office Landscaping • Store fixtures • Enclosures Museum • Theatrical & Window Displays • Safety Shields • Etc.  

Download:

 


TDS 95-1A2 | Type 2 Latches and the 'O' Receivers OR250-1.000

JOINING MULTIPLE FREE STANDING PANELS AT VARIABLE ANGLES For: Exhibits • Office Landscaping • Store Fixtures • Stage Settings Museum & Art Displays • Safety Sheilds • Window Displays • Etc.  

Download:

 


TDS 95-1B1 | Type 2 Latches and the 'O' and 'OD' Receivers

JOINING PANELS – FREE STANDING, OR TO A WALL, AT VARIABLE ANGLES USING NORSE LATCHES AND ‘O’ & ‘OD’ RECEIVERS For: Exhibits • Office Landscaping • Store fixtures • Enclosures Museum • Theatrical & Window Displays • Safety Shields • Etc. For ‘O’ Rceivers See TDS 95-1A1  

Download:

 


TDS 95-2A1

THE LARGE ‘O’ AND ‘OD’ RECEIVERS CAN BE USED FOR EXHIBITS, STORE FIXTURES, MUSEUM AND ART DISPLAYS, OR FOR NUMEROUS PARTITIONING FUNCTIONS. ‘O’ and ‘OD’ Receivers can be used with Type 2 and Type 3 Latches as shown here and on the following pages. They can also be used with Type 1 Latches: see TDS 48.  

Download:

 


TDS 95-2A2 | Large 'O' and 'OD' Receivers for Joining Panels at Various Angles

SHOWN HERE ARE THREE SIZES OF ‘O’ RECEIVERS WHICH WILL ACCOMMODATE NUMEROUS PANELS AT ANY ANGLE. TYPE 1 AND TYPE 3 LATCHES CAN ALSO BE USED WITH ‘O’ RECEIVERS. See TDS 48 for Type1 Latch and ‘O’ Receiver mounting.  

Download:

 


TDS 95-2B1 | Type 2 Latches and the Large 'O' and 'OD' Receivers

Shown below are two of many possible panel arrangements using Type 2 Latches with the OR250-3.5 and the OR250-2.38 ‘O’ Receivers. Type 1 and Type 3 Latches can also be used.  

Download:

 


TDS 95-2B2 | Type 2 Latches and the Large 'O' and 'OD' Receivers

Shown below is another of many possible panel arrangements using Type 2 Latches with the OR250-3.5 ‘O’ Receiver. Type 1 and Type 3 Latches can also be used. See TDS 48 for Type 1 Latches and ‘O’ Receivers.  

Download:

 


TDS 95-2C1 | Type 2 Latches and the Large 'O' and 'OD' Receivers

The full scale illustrations on these sheets show the capacity of the several sizes of ‘O’ Receivers to accommodate panels of different thicknesses and arrangements. Type 1 and Type 3 Latches can also be used. See TDS 48 for Type 1 Latches and ‘O’ Receivers Shown below is one of many possible panel arrangements using Type 2 Latches and the OR250-4.5 Receiver.  

Download:

 


TDS 96-1 | Type 2 Latch and Frame Tubing Receivers

FOR EXHIBITS, STORE FIXTURES, OFFICE PANELING, MODULAR EQUIPMENT, ETC. Type 2 Latches can be used on tubular framed paneling to make in-line butt joints, ‘T’ & corner joints, and also 4-way posts utilizing a slot in the attached tubular framing as a Receiver.  

Download:

 


TDS 96-2A | Type 2 Latch in Tubular Framing using a Slot Receiver

THIS APPLICATION SHOWS THE MOUNTING METHOD AND SLOTTING NECESSARY FOR THE INSTALLATION OF THE LATCH THROUGH THE TUBING SLOT  

Download:

 


TDS 96-2B | Type 2 Latch in Tubular Framing using an 'RSL' Receiver

THIS APPLICATION SHOWS THE MOUNTING METHOD AND SLOTTING NECESSARY FOR THE INSTALLATION OF THE LATCHES & RECEIVERS THROUGH THE TUBING SLOTS  

Download:

 


TDS 97-1 | Type 2 Latch and Rod Receiver

THE ROD RECEIVER CAN BE USED AT ALMOST ANY ‘SETBACK’ WITH ANY LATCH, PLUS PROVIDING OTHER ADVANTAGES  

Download:

 


Type 3 Latches and Receivers



 


TDS 106-1A | Type 3 Latch

USED EXTENSIVELY IN FRAMED CONSTRUCTION FOR EXHIBITS, DISPLAYS, OFFICE PANELS, PREFAB STRUCTURES, STORE FIXTURES, ACOUSTICAL & SAFETY SHIELDING, ELECTRONIC SHELTERS, THEATRICAL SCENERY, ETC. • HERE ARE A FEW OF MANY LATCH/RECEIVER COMBINATIONS AVAILABLE •  

Download:

 


TDS 106-1B | Type 3 Latch : Applications

APPLICATIONS  

Download:

 


TDS 106-2A | Type 3 Latches

Either the S1500 or the S1250 Spring Hook can be Utilized in the Type 3 Latches  

Download:

 


TDS 106-2B | Type 3 Latches : Applications

APPLICATIONS  

Download:

 


TDS 106-3A | Type 3 Latches and Receivers

The Variable ‘Setbacks’* and Choice of Spring Hooks The S1500 or S1250 Spring Hook Can Be Used In The Type 3 Latches  

Download:

 


TDS 106-3B | Type 3 Receivers

The Variable ‘Setbacks’* and Slotted Case Configuration  

Download:

 


TDS 106-3C | Type 3 Latches: Applications

APPLICATIONS  

Download:

 


TDS 106-4 | Type 3 Latches and Receivers, Variable Setbacks

To further assist you in selecting compatible Latch/Receiver combinations, we have color coded the Latches and correlated them by color with dimensionally mated Receivers when used flange-to-flange as illustrated in Figs. 4, 5, 6.  

Download:

 


TDS 107-1 | Type 3 Latch S1500-3-750 and Type 3 Receiver R500-3-750

FOR EXHIBITS, STORE FIXTURES, OFFICE PANELS, PREFAB STRUCTURES, ETC. Shown here in Figs. 1, 2, & 3, as mounted in ‘2x3’ framing. (1.500”/38.1mm x 2.500”/63.5mm), this Latch/Receiver combination is also frequently used in thinner framing (See Figs. 4A & 4B)  

Download:

 


TDS 107-3A | Type 3 Latch S1500-3-750 and the Rod Receiver

The use of a Rod Receiver in combination with a Type 3 Latch offers a simple and economical way to join members such as 2x4s. The Rod Receiver is the least expensive and most easily installed receiver. It can also be used with any Norse Latch. The setback of the Latch can vary to accommodate application requirements. Locating, drilling and installing the Rod Receiver can actually be done when the panel members are about to be put together. In certain applications this can be highly advantageous.  

Download:

 


TDS 107-4A | Type 3 Latch and Receiver: Joining Sheet Metal Components

When sheet metal components are joined and they are to be touching, it is necessary to dimple the material to flush mount the attaching screws. Being that the flanges of the Latch and Receiver cases are also dimpled, a buildup of the simple “stack” occurs as shown below. Obviously this adds to the gap between the case flange faces and must be factored into the “setbacks” chosen to maintain approximately the proper “reach” of the Latch hook. The S1500-3-750 latch chosen in this assembly has a ‘reach’ of 1.500”, which satisfactorily matches the 1.477”/37.5mm span between the Latch hex and the Receiver pin.  

Download:

 



 

Stocking Distributor for Germany and Benelux Easy Click Systems

User login