TDS 94 Series

Browse through these Technical Data Sheets to help you find technical information, measurements, applications or options for these Norse Latch Systems. Or use the complete list below to choose the most appropriate Information Sheet.
 

TDS 94-7 | Type 2 Latches and Slot Receivers • Variable Angle Attachment


CHANGING THE ANGLE BETWEEN PANELS JOINED TO A TUBE IS FACILITATED BY WIDENING THE RECEIVER SLOTS IN THE TUBE AS SHOWN HERE
In the Typical Example Shown Here, Panels of 1.750”/44.5mm Thickness Are Being Joined at an Initial Angle of 60°, With Some Angular Variation Required. A Tube Diameter of 3.500”/88.9mm and a Slot Width of 1.040”/26.4mm Accommodates the Panels and Allows Angular Displacement of Each Panel of ±10°. Other Tube Diameters and Slot Widths Can Be Used.


 




TDS Sheet Results
Listed by TDS # and Title
  • CHANGING THE ANGLE BETWEEN PANELS JOINED TO A TUBE IS FACILITATED BY WIDENING THE RECEIVER SLOTS IN THE TUBE AS SHOWN HERE In the Typical Example Shown Here, Panels of 1.750”/44.5mm Thickness Are Being Joined at an Initial Angle of 60°, With Some Angular Variation Required. A Tube Diameter of 3.500”/88.9mm and a Slot Width of 1.040”/26.4mm Accommodates the Panels and Allows Angular Displacement of Each Panel of ±10°. Other Tube Diameters and Slot Widths Can Be Used.  

 

Stocking Distributor for Germany and Benelux Easy Click Systems

User login