TDS 26 Series

Browse through these Technical Data Sheets to help you find technical information, measurements, applications or options for these Norse Latch Systems. Or use the complete list below to choose the most appropriate Information Sheet.

TDS 26-1A1 | Type 1 Small Latches - Ganged

 "Ganged" Means Mounting Two or More Latches on a Common Shaft, Thereby Making Them Simultaneously Operable by a Single Handle or Key


Flexible! Any of a Variety or Receivers can be Used
Call for Engineering Assistance: (800) 546-6773 or (860) 482-1532

Fig. 1 Two small Type 1 Latches are shown mounted inside a clear plastic box, operated by a single fixed handle (or a separable hex key). See TDS 18-1 for mounting dimensions for the Type 1 Small Latches and the 'U' Receiver shown here.


Fig. 2 A variety of receivers such as the flush- mounted Type 2 Small Receiver shown here at bottom can be used in a "ganged" mounting. See TDS 22-1A2 for mounting of the Type 1 Small Latches and the Type 2 Small RSL Receivers illustrated here.


Fig. 3 Refer to TDS 154-1 for details on the complementary shafts, collars, couplings and bearings available to facilitate mounting multiple latches together in a ganged configuration. Shown here are two ganged Type 1 Latches.

Fig. 4 Another ganged latch application is shown here, where a common shaft simultaneously operates two latches that are mounted on either side of a panel, thereby equalizing and increasing the clamping load when they are engaged with the two 'U' Receivers shown at right. 

TDS Sheet Results
Listed by TDS # and Title


Stocking Distributor for Germany and Benelux Easy Click Systems


  • Total Visitors: 1515863
  • Since: Thu, 02/28/2019 - 13:25